ORP Electrode with DIN Connector for General Laboratory

HI3619D

ORP Electrode with DIN Connector for General Laboratory

$227.00

The HI3619D is a glass body, refillable, single junction ORP electrode with a DIN connector. This electrode has a single ceramic junction as part of the reference cell and a platinum ORP sensing pin. This design consideration is ideal for general laboratory use and disinfection ORP measurements.

Platinum Pin
Single Ceramic Junction
Use for laboratory general purposes with HI98140, HI98150, HI98230, HI98240 pH meters

Learn More

Thank you for your interest in our products. A representative will contact you within the next business day.

Hanna Instruments offers a wide variety of ORP electrodes that are designed for many different applications. The type of material used for the sensing pin, type of glass used for the body material, type of junction, type of reference and electrolyte used are just some of the design considerations.

The HI3619D uses a platinum pin, glass body, single ceramic junction and is refillable with 3.5M KCl + AgCl.

Platinum Sensing Pin

The HI3619D ORP sensor is made with platinum. An ORP sensor must be chemically inert; it cannot be oxidized or reduced itself. It must also have the proper surface characteristics to promote rapid electron exchange, a property known as high exchange current density. Two noble metals have proven to work well for this purpose: pure platinum and pure gold are both used in the construction of ORP sensors. The platinum sensor is often preferred because it is mechanically simpler and safer to produce. Platinum can be welded to glass and has the same thermal coefficient. The platinum sensor signal is carried through the electrode body, and together with the reference signal is conducted to the measurement meter.

Glass Body

The glass body is ideal for laboratory use. The glass is resistant to many harsh chemicals and is easily cleaned. The glass body also allows for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature-dependent. The faster the equilibrium the steadier the reference potential.

Single Ceramic Junction

The outer junction of an electrode, also known as a salt bridge, is a necessary component of the electrical circuit. The movement of ions must flow through the junction for a steady reading. The outer reference has a single ceramic frit. The ceramic is a porous material that is easily fused with the glass body and has a similar expansion coefficient. A single ceramic junction has a flow rate of 15-20 μL/hour. Other junction types are available with higher flow rates and made with different materials.

Refillable

The HI3619D is a refillable probe. Since it is a single junction ORP electrode the fill solution is the HI7071 3.5M KCl + AgCl. If using a refillable ORP electrode, the fill cap should be removed prior to measurement. Removing the cap creates positive head pressure in the reference cell allowing for a higher flow rate of electrolyte through the outer junction. A higher flow rate will result in a faster and more stable reading.

DIN Connector

The HI3619D uses a DIN connector. This type of connector is generally proprietary to the meters they are supplied with and may not be interchangeable. Other types of connectors include BNC, screw type, T-type, and 3.5mm to name a few.

Don't Forget!

Add your reagents or accessories now to save time and money later!

HI547-11PB General pH Calibration Bundle, pH 4 & 7 (Bottles) $72.00

HI5710-11PB General pH Calibration Bundle, pH 7 & 10 (Bottles) $72.00

HI64710-11 Laboratory Calibration Bundle $147.00

HI54710-11 pH 4.01, 7.01 and 10.01 Technical Calibration Solutions with Electrode Storage Solution and Cleaning Solution (5 x 500 mL) $115.00

Resources

Specifications

Specification Name	Detail
SKU	HI3619D
Reference	single, Ag/AgCl
Junction / Flow Rate	ceramic, single / 15-20 µL/h
Electrolyte	KCl 3.5M + AgCl
Max Pressure	0.1 bar
Range	ORP: ±2000 mV
Recommended Operating Temperature	20 to 40°C (68 to 104°F)
Tip / Shape	platinum pin
Diameter	12 mm
Body Length	120 mm
Temperature Sensor	no
Matching Pin	no
Amplifier	yes
Body Material	glass
Cable	7-pole; 1 m (3.3')
Recommended Use	general purpose, laboratory general purpose, ORP titrations
Connection	DIN